
A groin guard is one of the most important bits of kit in your bag. Most look much the same on the shelf. What happens when a hard ball hits is where they differ.
Whether you're buying a first groin guard for a teenager, replacing a tired box before the season, or looking for an edge at the highest level, it's worth knowing what you're actually choosing between. This guide compares the Cover Core Cover with a typical traditional groin guard (often called a box, cup or abdominal guard): what each is made from, how it handles an impact, and how it fits.
The short version: a traditional box is a protective shell. The Core Cover was designed as a complete impact protection system, where the shell, the foam and the shape each do a specific job.
Where traditional groin guards fall short
The traditional groin guard has protected players for generations, and plenty of them do a reasonable job. But the basic design has changed very little, even as the game has got faster and players spend longer out in the middle.
- Moulded plastic construction. Most conventional groin guards are a single moulded plastic shell. Plastic is light and cheap to produce, but it flexes under a hard impact.
- Basic, single-material designs. Many have little or no dedicated padding, or a thin edge trim, so the shell does most of the work on its own.
- Limited impact management. Stopping the ball isn't the same as managing the force behind it. A shell can block contact and still pass a sharp spike of energy straight through.
- Standard shapes and fit. Generic shapes can leave pinch points and gaps, and a guard that moves around is a guard that isn't where it needs to be.
None of this means every traditional guard performs poorly. Quality varies a lot across the market. The point is that having a protective shell and designing a complete impact protection system are two different things.

The groin guard, re-engineered
The Core Cover was built around one question: what would a groin guard look like if you designed it from scratch, using modern materials and real impact data? Every part of it was chosen for a reason. Here's what it's made from, and why each decision matters.
Die-cast aluminium shell
The shell is die-cast aluminium, not moulded plastic, and specifically formulated to withstand repeated hard-ball impacts.
A stiffer shell deforms less on impact, so the force is spread across a wider area instead of concentrating at the point of contact. In Cover's testing the shell has taken hits at over 200km/h without visible indentation.Dual-density foam
Two separate layers of advanced polyurethane foam sit behind the shell: one firmer, one softer.
The firmer layer helps spread and slow the impact; the softer layer sits against the body for comfort. Cover's R&D showed the combination improves comfort both in everyday wear and during impacts.Ergonomic shape
A unique silhouette with flattened edges, shaped to reduce bulk and remove pinch points.
The flattened edges increase surface coverage and stabilise the impact zone, helping redirect force without restricting movement.Lightweight build
At 160g, the Core Cover is light enough that most players stop noticing it once they're out in the middle.
Protection only works if it's worn properly, every time. Comfortable, low-profile gear stays in place and stays on.Developed through testing, not guesswork
The Core Cover is the result of extensive research and development. More than 100 prototypes were designed, built and tested, and the final design went through thousands of hours of impact testing.
Impacts were recreated with a custom pneumatic air cannon, so the guard could be tested under realistic conditions rather than static loads. Alongside physical testing, Finite Element Analysis (FEA) and predictive impact modelling were used to see how forces travel through the shell and foam before each new prototype was made.
Read more about the process on our Research & Development page.
Core Cover vs a traditional groin guard
How the Core Cover compares with a typical traditional groin guard. Where a feature depends on the brand and model, we've marked it "Varies".
| Feature | Core Cover | Typical traditional design |
|---|---|---|
| Die-cast aluminium shell | ✓ | — |
| Dual-density shock-absorbing foam | ✓ | — |
| Engineered impact management | ✓ | Varies |
| Ergonomic design | ✓ | Varies |
| Lightweight construction | ✓ | Varies |
| Extensive impact testing | ✓ | Varies |
| Finite Element Analysis | ✓ | — |
| Multiple prototype development | ✓ | Varies |
| Purpose-built protective system | ✓ | Varies |
"Typical traditional design" describes a conventional moulded plastic groin guard, box or cup. It doesn't refer to any specific brand.
See the shell, foam and fit up close.
Explore Core CoverWhy engineering matters
Two guards can look alike and behave very differently when a ball hits them. These are the things that decide how much of an impact actually reaches you.

Absorption
Soaking up energy at the point of contact. Padding does this, but on its own it can bottom out, and a thin shell over soft foam can still pass a sharp spike of force through to the body.
Dispersion
Spreading the force across a wider area and over a fraction more time, so no single point takes the full hit. A stiff shell backed by layered foam does both: it disperses first, then absorbs.
Material selection
The shell material sets how much the guard flexes on impact. A stiffer material holds its shape and shares the load; a more flexible one gives way at the point of contact.
Multi-layer construction
Each layer has a job. In the Core Cover, the shell spreads the force, the firmer foam slows it and the softer foam keeps it comfortable against the body.
Realistic testing
A guard should be tested the way it's used: with real cricket balls at real speeds. That's why Cover combined air-cannon impact testing with computer modelling.
Performance over price point
Protective gear is often built to hit a price. Cover started from the performance it wanted and worked back from there.
Who is Cover designed for?
A good groin guard matters at every level, from junior nets to international cricket. The way the Core Cover is built doesn't change with the level you play at.

Juniors and parents
Young players often get hand-me-down or entry-level gear, yet they're learning to bat against bowlers who are still finding their line. Better protection builds confidence early. The Core Cover is currently one size, designed for adult males, so check our size guide or get in touch before buying for a younger player.

Club players
Club sport means long Saturdays, uneven surfaces and the occasional genuinely quick bowler. A groin guard that stays put, stays comfortable and takes a hard hit lets you focus on the next ball, not the last one.

Professional players
At the top level, bowling regularly passes 140km/h and players spend hours at the crease. Cover is worn by international players who expect their protective equipment to perform as well as the rest of their kit.
Groin guard FAQs
What is the best groin guard?
The best groin guard is one that combines a strong, stiff shell, proper impact absorption and a secure, comfortable fit, so it protects you and stays in place. Look at what the shell is made from, whether there's dedicated shock-absorbing foam, and how it has been tested. The Core Cover pairs a die-cast aluminium shell with dual-density foam and has been impact tested at over 200km/h.
What is the difference between a traditional groin guard and the Core Cover?
A traditional groin guard, or cricket box, is usually a single moulded plastic shell. The Core Cover is a complete protective system: a die-cast aluminium shell that disperses impact, two layers of polyurethane foam that absorb it, and an ergonomic shape with flattened edges for coverage and fit. It was developed through more than 100 prototypes, air-cannon impact testing and Finite Element Analysis.
What is the Core Cover made from?
The Core Cover has a die-cast aluminium shell with an architectural-grade powder-coated finish, backed by dual-layer viscoelastic polyurethane (PU) foam. It weighs 160g.
Is the Core Cover suitable for juniors?
The Core Cover is currently one size, designed for adult males. Some older juniors may fit an adult size, but it isn't made in junior sizes, so check our size guide or contact us and we'll help you work out whether it's right for your player.
Why does a good groin guard matter?
A cricket ball is hard and can travel at well over 100km/h, even below elite level. A groin injury can be extremely painful and, in serious cases, cause lasting damage. A well-engineered groin guard reduces the force that reaches the body, and the confidence it gives helps players stay focused at the crease.
Protection shouldn't be an afterthought
Cover was founded to rethink the conventional groin guard: to take the most overlooked piece of kit in the bag and engineer it properly. The result is the Core Cover, a groin guard built from die-cast aluminium and dual-density foam, and tested at real match speeds.
Want to know where it started? Read our story.